Products

75 items

1.2"/Ft Toyota FJ80 Tie Rod End Reamer

Our item #5912 is a 1.200” taper per foot Toyota FJ-80 ball joint and tie rod taper reamer made o...

Our item #5912 is a 1.200” taper per foot Toyota FJ-80 ball joint and tie rod taper reamer made out of M2 high speed steel. This is a genuine automotive taper at 1.200” taper per foot, also known as a 1:10 taper or 6 degree included angle. This reamer is the correct taper for the Toyota FJ-80 Land Cruiser Heavy Duty Tre tie rod end crossover steering applications. This reamer is also the correct reamer for the older Ford Bronco Trac Bar Bolt.   SPECIFICATIONS Over All Length: 6 ½” Over All Fl...

$158.99

1.5"/Ft Chevy Taper Tie Rod End Reamer

Our item #5952 is a 1½” taper per foot ball joint and tie rod taper reamer made out of M2 high sp...

Our item #5952 is a 1½” taper per foot ball joint and tie rod taper reamer made out of M2 high speed steel. This is a genuine automotive taper at 1½” taper per foot, also known as a 7.15 degree included angle. This reamer is the correct taper for the popular GM Chevy 1 Ton Tre tie rod end and the Heavy Duty Dana 30, 44, and 60 crossover steering applications.   SPECIFICATIONS Over All Length: 6 ½” Over All Flute Length: 4 ½” Large End Diameter: 1” Small End Diameter: 7/16” Shank Diameter: ½” ...

$158.99

1.5"/Ft Heavy Truck Tie Rod End Reamer

ABOUT Our item #6925 is an oversized 1½” taper per foot spiral flute ball joint and tie rod taper...

ABOUT Our item #6925 is an oversized 1½” taper per foot spiral flute ball joint and tie rod taper reamer made out of M2 high speed steel. This reamer is used for larger ball joints and tie rod ends found on construction vehicles, construction equipment, fire trucks, box trucks, semi-trucks, farm equipment, fork lifts, military vehicles and equipment, etc. This reamer will work for anything over 3/4” on the small end at 1 ½” taper per foot.                                                      ...

$199.99

7/8-14 LH Thread Hand Taper Tap

ANSI 7/8-14 LH Thread, Hand Taper Tap .

ANSI 7/8-14 LH Thread, Hand Taper Tap .

$67.41

7/8-14 RH Thread Hand Taper Tap

ANSI 7/8-14 RH Thread, Hand Taper Tap .

ANSI 7/8-14 RH Thread, Hand Taper Tap .

$57.76

7/8-18 LH Thread Hand Taper Tap

ANSI 7/8-18 LH Thread, Hand Taper Tap .

ANSI 7/8-18 LH Thread, Hand Taper Tap .

$94.34

7/8-18 RH Thread Hand Taper Tap

ANSI 7/8-18 RH Thread, Hand Taper Tap .

ANSI 7/8-18 RH Thread, Hand Taper Tap .

$72.16

Ball Socket, Medium (Full Hydro)

  Features Body Diameter = 2.5" Total Length of Body (not including threaded ends) = 2.75" Tot...

  Features Body Diameter = 2.5" Total Length of Body (not including threaded ends) = 2.75" Total Length of Body Including Threaded Stem On Ram Side = 4.0" Total Length of Threads on Link Side Pin = 1.4" Complete Unit Length = 6.570" EMF Medium Ball Sockets are used for Full Hydraulic Applications with double-ended rams and will also replace the ball sockets in a 1 ton Chevy IFS System. The Medium Ball Socket features your choice of either a 3/4" 16 TPI shank, or a 7/8" 14 TPI on the ra...

$123.98

Ball Socket, Small (Hydro-Assist)

  Features Body Diameter = 2.217" Length of Body (Not including threaded stems) = 2.665" Lengt...

  Features Body Diameter = 2.217" Length of Body (Not including threaded stems) = 2.665" Length of Body including threaded Ram Side Shank = 3.630" Length of Threads on Link Side Pin = 1.975" Total Length of Unit end to end = 6.0" EMF Small Ball Sockets are used for Hydro-Assist Applications with double-ended rams - replacing the Heim/Clevis. The Small Ball Socket features your choice of a 3/4" 16 TPI, or a 7/8" - 14 TPI shank on the ram side and on the link side. All components (bodies,...

$98.99