It appears that your cart is currently empty
Technical Help (Text): (403) 999-0592 Sales & Service (Text & Call): (403) 935-3540 Toll Free (Call): (877) 236-3545
EMF 3/4" Straight-Pin Tie Rod End Set
This set was made specifically to replace the heim joints in a Dodge Thuren Fab Steering System...
This set was made specifically to replace the heim joints in a Dodge Thuren Fab Steering System but can be used for someone planning on making their own steering and have already drilled out their knuckles to a 3/4" Bolt. THESE DO NOT REPLACE THE ENDS ON STOCK DODGE STEERING SYSTEMS!!! THEY ARE A DIFFERENT SIZE BODY THAN WHAT DODGE USES. ** NOTE** THESE WILL NOT WORK WITH STOCK DODGE RIMS ** If you have stock Dodge Rims, let us know and we can swap the passenger knuckle pin out for a low ...
$449.99
High-Angle Tie Rod End, Straight 3/4" Pin, 4-10...
7/8-14 and 7/8-18 in stock now! **This Joint is used for LOWER DRAGLINK end and those...
7/8-14 and 7/8-18 in stock now! **This Joint is used for LOWER DRAGLINK end and those mounted BELOW the pitman arm only . If you need a high deflection for the PITMAN ARM joint that is mounted ABOVE the pitman arm, please see the Inverted Pitman Arm Joint in the Product List ** Features Thread Length - 2.640" Center of cap to outer edge of the head - 1.125" (Check your rim clearance if putting this joint at the passenger knuckle, lower draglink location to make sure the head...
$113.99
Tie Rod End, 3/4" Straight Pin, Draglink, 0-4" ...
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.7...
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.75" Head Width (without Cap) - 1.148" Head with with Cap - 1.305" Overall Length - 5" 3/4" Hat Pin overall Length below shoulder - 2.465" Length from back of cap to end of Hat = 1.4375" Total Weight - 2 lbs Total Deflection - 29 degrees one way EMF Tie Rod Ends just got better! Do you have an application that requires a straight bolt to go through? No problem!! We took out the tapered pin and deve...
$110.99
Tie Rod End, 3/4" Straight Pin, Low Deflection ...
Features Thread Length - 2.640" Head Diameter - 1.75" Head Width (without Cap) - 1.1...
Features Thread Length - 2.640" Head Diameter - 1.75" Head Width (without Cap) - 1.148" Head with with Cap - 1.305" Overall Length - 5" 3/4" Hat Pin overall Length below shoulder - 2.465" Length from back of cap to end of Hat = 1.4375" Total Weight - 2 lbs All EMF made products are 100% CANADIAN made by us and assembled by us in our own shop EMF Regular Body, Low Deflection Tie Rod End with EMF Wobble-Stopper Bushing. Bushing is made of a very high durometer, high quality materi...
$126.99
Tie Rod End, 3/4" Straight Pin, Low-Deflection
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.7...
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.75" Head Width (without Cap) - 1.148" Head with with Cap - 1.305" Overall Length - 5" 3/4" Hat Pin overall Length below shoulder - 2.465" Length from back of cap to end of Hat = 1.4375" Total Weight - 2 lbs Total Deflection - 18 degrees one way EMF Tie Rod Ends just got better! Do you have an application that requires a straight bolt to go through? No problem!! We took out the tapered pin and deve...
$110.99
Tie Rod End, 5/8" Straight Pin, Draglink 0-4" Lift
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.7...
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.75" Head Width (without Cap) - 1.148" Head with with Cap - 1.305" Overall Length - 5" 5/8" Hat Pin overall Length below shoulder - Length from back of cap to end of Hat = 1.4375" Degrees of Deflection - 30 degrees one way Total Weight - 1.8 lbs All EMF made products are 100% CANADIAN made by us and assembled by us in our own shop EMF Tie Rod Ends just got better! Do you have an application that re...
$110.99
Tie Rod End, 5/8" Straight Pin, Low Deflection
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.7...
7/8-14 and 7/8-18 in stock now! Features Thread Length - 2.640" Head Diameter - 1.75" Head Width (without Cap) - 1.148" Head with with Cap - 1.305" Overall Length - 5" 5/8" Hat Pin overall Length below shoulder - Length from back of cap to end of Hat = 1.4375" Total Weight - 1.8 lbs All EMF made products are 100% CANADIAN made by us and assembled by us in our own shop EMF Tie Rod Ends just got better! Do you have an application that requires a straight bolt to go through? No pr...
$110.99
Tie Rod End, Straight 3/4" Pin, Set of 4
7/8-14 and 7/8-18 in stock now! This kit is generally used to replace the joints in ...
7/8-14 and 7/8-18 in stock now! This kit is generally used to replace the joints in a Thuren Fab steering system for Dodge Trucks. Generally their system is 7/8-14 Threads, Pitman (mounted BELOW pitman Arm) and Driver Knuckle are RH thread, Both Passenger knuckle ends are LH thread. If you have something different please specify in the notes when ordering or call/text us at 403-935-3540. These joints have straight 3/4" Taper only and do not replace the stock tie rod ends on a s...
$449.99
1 – 8 product(s) of 8