EMF Dodge Trackbar Replacement heim for aftermarket Track bars such as Carli Suspension or Thuren Fabricatrion brand.
Available in a 7/8-14 Shank size, ball width is 1.625" wide with a 16mm bolt hole or 18mm Bolt hole (2003-2007.5 will have to drill the existing 14mm hole out to 16mm, 2008-2013 need 16mm and 2013.5+ need 18mm) Right-hand thread - also includes Jam Nut.
Please measure your current setup to be sure of the correct fit, as this may not replace all heim joints used in Aftermarket Dodge Track Bars as another company can be different.
1. Measure the Inner Diameter of the bracket where the heim mounts into - this will be the width of the ball (ours is 1.625" wide)
2. Measure the Bolt size.
3. Measure the Shank size on the heim joint to ensure it is 7/8"-14 and that it is right-hand thread.
Should you come across another size you might need, please give us a call and we will see what we can do to help you. 877-236-3545
All components are made in house out of a billet 4140 Chromoly and all are coated with zinc, aside from the balls which are coated with a black Liquid Nitride to ensure the best possible wear and corrosion resistance. You shouldn't have to replace any components for many years, however if the need ever does arise a rebuild kit is only a click away so you never have to worry about purchasing a complete heim joint again! All EMF heims are fully adjustable, greaseable and rebuildable.
- Thread Length - 2.5"
- Head Diameter -2.250"
- Head Width - 1"
- Overall Length - 4.850"
- Total Weight - 1.5 lbs
- Ball WIdth - 1.625"
- Hole Size - 16mm or 18mm