EMF Dodge Ram 2500/3500 Trackbar Replacement heim for aftermarket Track bars such as Carli Suspension or Thuren Fabricatrion brand.
Available in a 7/8-14 Shank size, bushing width is 1.625" wide with a 14mm (2003-2007) 16mm bolt hole (2007.5-2013) or 18mm Bolt hole (2013.5-2021) Right-hand thread - also includes Jam Nut AND FOR A LIMITED TIME ONLY - 1 EXTRA PAIR OF REPLACEMENT BUSHINGS so this joint can last a lifetime!
Please measure your current setup to be sure of the correct fit, as this may not replace all heim joints used in Aftermarket Dodge Track Bars as another company can be different.
1. Measure the Inner Diameter of the bracket where the heim mounts into - this will be the width of the bushing (ours is 1.625" wide)
2. Measure the Bolt size.
3. Measure the Shank size on the heim joint to ensure it is 7/8"-14 and that it is right-hand thread.
Housing and Sleeve are made in house out of a billet 4140 Chromoly and all are gas nitrided to ensure the best possible wear and corrosion resistance. The bushing is also MADE IN CANADA with an extremely high durometer material.
You shouldn't have to replace any components for many years, however if the need ever does arise a rebuild kit is only a click away so you never have to worry about purchasing a complete joint again! Rebuild Kit available here: Dodge Trackbar Bushing Replacement (emfrodends.com)
- Thread Length - 2.1"
- Head Diameter -2.250"
- Head Width - 1"
- Overall Length - 4.50"
- Total Weight - 1.2 lbs
- Bushing Width - 1.625"
- Hole Size - 14mm, 16mm or 18mm