EMF Rod Ends & Steering Components - Canada Rod Ends, Heim Joints, Tie Rod Ends and Steering Parts
EMF Rod End FAQ
EMF Pinion Brake FAQ
Shipping & Policies
EMF Steering Joints
Tie Rod Ends
EMF Hummer H1 Tie Rod Assembly
EMF Tie Rod Assembly for 1992-2006 Hummer H1.
Customers looking to purchase these Hummer H1 Tie Rods, please contact our US Distributer - Rubber Duck 4x4
This kit includes the following:
2 x EMF Female Tie Rod Ends
2 x EMF Locking Jam Nuts
1 x Solid 4140 HTSR Threaded Link
EMF Hummer H1 Tie Rod Ends feature 29 degree deflection each way, making it a total 58 degree deflection.
Direct Upgrade Replacement for AM General Part # 12507026
Manufactured out of 100% 4140 HTSR Chromoly Steel
Black Liquid Nitride coating on all body and pin components to ensure a long wear and corrosion resistance
Female Tie Rod End bodies couple with a solid 1.5" 4140 HTSR link ensure a strong component that can handle abuse
Tie Rod Ends are fully rebuildable, adjustable and greaseable
Locking Jam Nuts thread onto the link as well as overlap the body of the Tie Rod End to ensure a perfect locking fit. Flats are milled to allow adjustment with a wrench
Tie Rod Ends are RH and LH threads to allow ease of adjustment
Non-Tapered Body so there is no weak point susceptible to breakage
The Ball/Pin has the ability to deflect equally 360 degrees creating maximum front to back rotation as well as side to side. This eliminates the joint form being over-extended and pulled apart.
Race tolerances create a wiper effect between the race and ball - eliminating the need for a boot and preventing grease from being washed out.
All EMF Tie Rod Ends feature our Patent Pending retaining system technology that will keep the inner components tight and in place longer, reducing premature wear on the inner components, thus, increasing the time between maintenance tightening.
If the joint becomes loose, it can simply be tightened in place. There is no need to remove the component from the vehicle.
EMF Hummer H1 Tie Rod Assembly REAR
EMF Tie Rod End Set, Dodge 3/4" Straight Pin
EMF Tie Rod End, 5/8" Straight Pin
EMF Tie Rod End, 3/4" Straight Pin, High deflection
EMF Tie Rod End, Chevy Taper
EMF Tie Rod End Set, Superduty Taper with Bungs
EMF Tie Rod End, 3/4" Straight Pin, Low deflection
EMF Tie Rod End Set, Superduty Taper
Share your knowledge of this product.
Be the first to write a review »
Evolution Machining & Fabrication Inc. All Rights Reserved.