EMF Rod Ends & Steering Components - Canada Rod Ends, Heim Joints, Tie Rod Ends and Steering Parts
EMF Rod End FAQ
EMF Pinion Brake FAQ
Shipping & Policies
EMF Steering Joints
Tie Rod Ends
EMF Tie Rod End, Chevy Taper
1.0" TRE, LH [Add $5.00]
1.0" TRE, RH [Add $5.00]
7/8" TRE, LH [Add $5.00]
7/8" TRE, RH [Add $5.00]
1.0" Shank [Add $0.66]
EMF Chevy Taper Tie Rod Ends are our best selling TRE for any type of steering system. AVAILABLE NOW WITH A NEW DESIGN AND PATENT-PENDING TECHNOLOGY that will ensure all inner components of any of our EMF Tie Rod Ends, Rod Ends or Ball Sockets will remain in place, thus, not allowing the back locking cap to loosen. ** Added pressure and friction on the joint will generally cause the cap to back off, resulting in play within the joint and wear on the internal components - We have solved this issue. See our Friction Testing video
Even if the set screw and threaded cap back out completely during your trail ride, you can still run with the joint in place and not have to worry about the inner components coming loose - which ensures you have time to get back to camp without having to make a trail fix. It also ensures that you have a longer wear of your components because it reduces the ability of the joint to have premature play.
Available in a 7/8" Shank or a 1" Shank (18 TPI), Left-hand and Right-Hand threads available and features a 3/4" taper on the widest part of the pin to a 5/8" taper on the smallest part of the pin. All components of our Tie Rod Ends are made in house from a billet 4140 Chromoly and coated with zinc, aside from the pins which are coated with a black liquid nitride to ensure the best possible wear and corrosion resistance. You should be able to go many years without needing to replace any of the internal components.
Unlike any other Tie Rod End on the market, Evolution TRE's are serviceable, greaseable and REBUILDABLE. If you ever start to feel a little slop in the joint, you just tighten the cap. If you ever have to replace the inner components, you just have to buy a rebuild kit! Wouldn't it feel great to have a long lasting, durable Tie Rod End on your steering system that you never had to buy again?
EMF Tie Rod End Testing
Flying Zucchini Brothers Tie Rod End Testing
Thread Length - 2.640"
Head Width - 2.103"
Head with with Cap - 1.305"
Total Length from tip of pin to back of cap - 3.468"
Overall Length - 5"
Total Weight - 1.8 lbs
All Evolution made products are 100% CANADIAN made by us in our own shop
EMF Tie Rod End Set, Dodge 3/4" Straight Pin
EMF Tie Rod End Set, Superduty Taper with Bungs
EMF Tie Rod End, 3/4" Straight Pin, Low deflection
EMF Hummer H1 Tie Rod Assembly
EMF Hummer H1 Tie Rod Assembly REAR
EMF Tie Rod End, 3/4" Straight Pin, High deflection
EMF Tie Rod End Set, Superduty Taper
EMF Tie Rod End, 5/8" Straight Pin
Share your knowledge of this product.
Be the first to write a review »
Evolution Machining & Fabrication Inc. All Rights Reserved.